We recently completed work on a hopper manufactured from mild steel and then painted afterwards. Our customer provided the design and we manufactured the hopper to their specification.
If you require a hopper to your specification, please contact us.
We recently completed work on replacing the hull and deck of a dredger boat with welded metal sections for a local company, in own workshop.
As you can see from the photographs the original shell was in a poor state and very corroded.
We fabricated and welded all the new panels from mild steel and then the hull was painted.
The old deck and other sections were removed and then fabricated from mild steel durbar.
If you have a boat that needs repairing or even completely overhauling, please contact us.
The original boat
The first mild steel panel
The lower half of the hull fitted
The hull during reconstruction
The deck stripped down
The deck during construction
The completed deck
The painted deck
Sailing off into the sunset
We recently completed works replacing the side panels on two delivery trucks for a local builders merchant. We replaced the old panels with new aluminium folded panels with hinges and locks.
As you can see from the pictures below, the panels were fabricated to a high standard and are now ready for being painted (which we can arrange for you if required) and signwritten.
These were all measured and fabricated in house so if you required any type of panelling for any type of vehicle or trailer, from aluminium, stainless steel, galvanised steel etc. please contact us for more details.
We can fabricate aluminium steps, mobile or fixed (and out of other materials e.g. mild steel or stainless steel) for a variety of uses.
They can be used in aviation or logistics e.g. steps for access to aeroplanes, boats, wagons or other vehicles or for high level access.
Our stairs are usually made from aluminium because it is lightweight and strong which enables them to be easily repositioned whilst being hardwearing and long-lasting.
We can also fabricate any other similar items e.g. platforms, ramps, gantrys, walkways etc.
Our highly skilled team can make these steps to your own specification so please contact us to discuss your requirements.
We recently completed work at Myerscough College, Lancashire where we replaced the four canopies above the coals in the farriers workshop. We fabricated the canopies from 1.2mm mild steel in our workshop and installed them on site.
See photographs below, and contact us for further details.
We provide made to measure stainless steel splash-backs for your kitchen. These high quality and stylish items finish off your kitchen beautifully and are very affordable.
Splashbacks can come in a single piece or fabricated to fit into a corner and are fabricated from 304 stainless steel.
Alternatively we offer a full stainless steel wall cladding manufacture.
We can fabricate them to your specification and offer measure and fit service if required.
Please contact us for more details.
We manufacture die roller trolleys for easy handling of materials in workshops and factories. They are easy to adjust with rubber wheels to ensure safe lifting and transport of heavy or fragile items. These are made to order so can be manufactured to your own requirements.
Please contact us to discuss your requirements, a couple of examples are below.
We provide a wide range of custom fabricated for steel barriers for safety and or heavy duty steel barriers for protection against vehicles and or equipment in workshops on sites or delivery area. Whatever you need protecting we can fabricate barriers to suit. These are fully welded and can be painted or powder coated to your specification.
Please see an example below or contact us to discuss your requirements.
We can fabricate tool shadow boards for quick, easy access and safe storage of workshop tools.These can be custom made to any size and suit any arrangement of tools you require. We can also arrange to have your own logo and wording printed on the board.
See an example of the product below, and contact us to discuss your requirements.
We manufacture a wide range of products including stainless steel tables and furniture. This is an example of a mobile table with shelving which is used in a variety of commercial operations.
They are very hardwearing and look great for many years and can be manufactured to your own design so please contact us to find out more about our stainless steel tables and furniture.