Browse Tag: Mild Steel

Ductwork

stainless steel square to round ductworkDuctwork

If you need ductwork with a guaranteed level of service and quality you have come to the right place.

Fleetwood Sheet Metal are a highly experienced specialist ductwork manufacturer based in Fleetwood Lancashire.

We offer the following:

  • UK Wide service
  • ISO9001 accreditation
  • 100 years management experience in ductwork manufacture
  • Members of the Building & Engineering Services Association (BESA)
  • Highly experienced sales, technical, design, management, fabricators, coded welders and installers
  • Cutting edge software, machinery and systems
  • Guaranteed service and quality standards.

We can offer

  • manufacture only ductwork
  • or a fully installed system

We provide all types of ductwork for Commercial, Local Authority, Industrial and Nuclear sectors.

We specialise in rectangular and can provide the full service in

We provide the full service and our experienced sales team can advise you on any ductwork requirements you may have. Please contact us to discuss your requirements.

Replacement Hull & Deck of Dredger Boat From Mild Steel

We recently completed work on replacing the hull and deck of a dredger boat with welded metal sections for a local company, in own workshop.

As you can see from the photographs the original shell was in a poor state and very corroded.

We fabricated and welded all the new panels from mild steel and then the hull was painted.

The old deck and other sections were removed and then fabricated from mild steel durbar.

If you have a boat that needs repairing or even completely overhauling, please contact us.

01 The original boat
The original boat
02 The First mild steel panel
The first mild steel panel
03 The lower half of the hull fitted
The lower half of the hull fitted
04 The hull during reconstruction
The hull during reconstruction

 

The deck stripped down
The deck stripped down
The deck during construction
The deck during construction
The completed deck
The completed deck
The painted deck
The painted deck
After painting
After painting
Sailing off into the sunset
Sailing off into the sunset

Capabilities

Metal Fabrication Capabilities

Fleetwood Sheet Metal have the facilities to manufacture almost any products using Mild Steel, Galvanised Steel, Stainless Steel, Aluminium, Copper and Brass. Covering 12000sq feet with a 10 tonne capacity crane. Fleetwood Sheet Metal’s fabrication workshops can meet the demands and requirements of all its customers needs.

Welding

All our fabricator welders are certificated to B.S EN 287 covering a wide range of steels such as carbon and alloy steels, nickel alloys and non ferrous materials.

Employing OXY/ACT, MMA, MIG/MAG and TIG welding processes and adopting the correct pre-heats, inter pass temperature and post-heat requirements within the procedure, Fleetwood Sheet Metal can meet the stringent demands of most applications.

Quality Contol

We have full quality control testing available for all products on site and having a machining function alongside our fabrication facilities, we offer the customer an important option when sub-contracting work.

Find Out More

See examples of our fabrication work or view a list of fabrication products. Alternatively please speak to our helpful staff to discuss your requirements.